Banner Product Services
Warning: is_file(): open_basedir restriction in effect. File(/home/solar/domains/ is not within the allowed path(s): (/home/h513565/:/tmp:/var/tmp:/usr/local/lib/php/:/var/www/html/) in /home/h513565/domains/ on line 258 Strict Standards: Only variables should be assigned by reference in /home/h513565/domains/ on line 9

โซลาร์ พีวี โมดูล

ทีเอสไอ พีวี สปอร์ต

Specification Models: Modules Rating : 230, 235, 240, 245, 250 Watt
Sheet S-230-60-1 Anodized Aluminum Frame
S-235-60-1 Weather Resistant Junction Box
S-240-60-1 High Efficiency Crystalline Sillicon Solar Cell
S-245-60-1 Built-in Bypass Diodes in Junction Box
S-250-60-1 Standard IEC 61215, IEC 61730, TIS 1843-2553
  ISO 9001 : 2008
  25 Years Limited Warranty


Responsive image

Spot solar modules are made with high efficiency solar cell and is electrically matched to minimize losses, for making modules suitable for commercial as well as domestic application.

Spot solar modules have been tested for grid connected as well as stand - alone systems offering high performance and relibility.

The solar photovoltaic module is manufactured with crystalline solar cell conforming to the strict requirements to international quality standards.

The strings laminated between sheets of ethyl vinyl acetate (EVA) and backsheet.

For moisture free protection, UV stability and electrical isolation material are used. Low iron and high transitivity glass is used for strength and high power output.

A high quality backsheet (TPT) Provides mechanical protection and electrical insulation up to 1,000 Volt.

Each raw material such as EVA, glass and backsheet is procured from the most reliable and proven sources.

The laminate are framed with a strong, robust and corrosion resistant aluminum frame with multiple mounting holes for ease of installation as customer's requirement.

Village Power
Electric Fence Charging
Solar Home System

Traffic Control Signals
Water Pumping

Security Lighting
Battery Maintenance
Outdoor Lighting
Solar Grid System


Electrical Properties at Standard Test Condition (STC)


Temperature Properties


Maximum Use Rate


Mechanical Properties


Performance may vary up to 10% from rated power due to temperature operation, spectrum and Multicrystalline Silicon Electrical specification are based on measurements performed at standard test conditions (STC) of 1000 W/m2 irradiance, air mass 1.5 and cell temperature of 25°C after long-term stabilization. related effects.

Note: Dimension and electrical specification of the solar modules may change without notice according to the type or size of cells in each lot to used in manufacturing lines.